TXL automotive wire 22 AWG

Signals & sensors · 13 colors

$0.76USD per meter

Shipping in Costa Rica: $10 · free from $100 or with an ECU

Meters

Total: $3.80 USD

Harness-grade qualityThe wire from our own installs

ShippingCosta Rica and international

AdviceWe'll help with your list

22 AWG TXL automotive wire: stranded bare copper conductor (7/30) with thin-wall cross-linked polyethylene (XLPE) insulation, resistant to heat, moisture, oil and gasoline for engine-bay use. Meets SAE J1128 and is rated from −40 °C to 125 °C. It's the same type of wire we use in our harnesses. Sold by the meter in 13 colors.

Sold by the meter13 colorsSAE J1128 · −40 to 125 °CØ 1.70 mm

Standard	SAE J1128 (TXL) · Ford M1L-123A · Chrysler MS-8288
Gauge	22 AWG (0.35 mm²)
Stranding	7/30
Conductor	Stranded bare copper
Insulation	Cross-linked polyethylene (XLPE), thin wall · min. 0.41 mm
Nominal outside diameter	1.70 mm
Operating temperature	−40 °C to 125 °C
Rated voltage	60 V DC (25 V AC) or less
Resistant to	Moisture, oil, gasoline, grease and most acids and solvents
Typical use	Sensor signals (TPS, CLT, IAT, crank), tachometer and low-current outputs
Sold	By the meter

Black	VR− / Hall / clutch in the ST harness
Brown	Grounds (GND · SGND) in the ST harness
Red	+12 V, 5 V reference and VR+ in the ST harness
Orange	Auxiliary / general use
Yellow	Coils in the ST harness
Dark green	Auxiliary / general use
Dark blue	Auxiliary / general use
Purple	Fan in the ST harness
Gray	Tachometer in the ST harness
Light blue	Fuel pump in the ST harness
Light green	Intake air temperature (IAT) in the ST harness
Pink	Coolant temperature (CLT) in the ST harness
Tan	TPS in the ST harness