13 colors

Power & grounds · by the meter
Shipping in Costa Rica: $10 · free from $100 or with an ECU
Total: $6.00 USD
16 AWG TXL automotive wire: stranded bare copper conductor (19/29) with thin-wall cross-linked polyethylene (XLPE) insulation, resistant to heat, moisture, oil and gasoline for engine-bay use. Meets SAE J1128 and is rated from −40 °C to 125 °C. It's the same type of wire we use in our harnesses. Sold by the meter in 2 colors.
| Standard | SAE J1128 (TXL) · Ford M1L-123A · Chrysler MS-8288 |
|---|---|
| Gauge | 16 AWG (1.0 mm²) |
| Stranding | 19/29 |
| Conductor | Stranded bare copper |
| Insulation | Cross-linked polyethylene (XLPE), thin wall · min. 0.41 mm |
| Nominal outside diameter | 2.40 mm |
| Operating temperature | −40 °C to 125 °C |
| Rated voltage | 60 V DC (25 V AC) or less |
| Resistant to | Moisture, oil, gasoline, grease and most acids and solvents |
| Typical use | +12 V power, power grounds and fuel pump |
| Sold | By the meter |
| Red | +12 V, 5 V reference and VR+ in the ST harness |
|---|---|
| Brown | Grounds (GND · SGND) in the ST harness |



Black with blue tracer · 8, 16 & 25 mm
